There was a lot of excitement when the New York Times wrote about a small company promising to make focus errors a thing of the past. A camera that allowed you to focus after you take the picture. Its subject was Lytro, a startup promising to make its technology available in a consumer product on the market within a year. And, sure enough, here is the Lytro Light Field Camera.
Over the intervening months, we’ve talked to Lytro’s Founder and CEO, Ren Ng, and attended a photo walk with the company’s ‘Light Field Camera’ but it’s only now, with the product about to hit stores, that we’ve had a chance to spend enough time shooting with it to really get to grips with what it can do.
Just to recap, the Light Field Camera (LFC) doesn’t capture ‘pictures’ in the way your current camera does – it’s capturing information about where the light is travelling. This information can then be turned into a picture or, more to the point, a series of pictures with different focus points.
It works by placing a microlens array in front of the sensor, which scatters the incoming light, based on the angle from which it approached. This information can be then used to calculate where the light would have ended up, had the camera been focused differently. What precisely that means for its output will become clear, but it’s worth knowing that the additional information gained about the source of the light comes at the expense of image resolution.
As a result, it’s best to step away from assumptions you might have based on traditional photography. Because the LFC is capturing different information about the light that hits it, it fares pretty poorly if you try to judge directly against the camera you already have. This isn’t a conventional camera that somehow lets you set the focus after shooting. That can be done but to do so leaves you with a 1.2MP point-and-shoot camera. From our use, we’d say the camera is best understood by learning how its two shooting modes work.
The camera’s default ‘Everyday’ mode is the one that attracted all the early publicity. It’s a point-and-shoot mode where you don’t have to think about focus when you take the photo. You can simply point the camera at your subject and press the shutter – the shot is taken almost instantly. The end result can be refocused from fairly close to the camera, out to infinity.
However, even in this simple mode, you’re not magically freed from the other concerns of conventional photography – behind the scenes it’s still having to set a shutter speed and ISO, so there are still the same risks of your subject moving too fast and appearing blurred in your images.
Creative mode is a recent addition to the camera that allows a little more control over the process. In this mode you can force the camera to refocus its lens closer than in Everyday mode, such that the zone over which the image can later be refocused is concentrated around your chosen point. This allows you to gain greater quality at the point you’ve selected but means you restrict the range over which the output can be refocused.
To a degree, these two modes give a hint at the two uses of the LFC – as a camera that allows simple snapping with the ability to correct focus, and a device that allows the creation of sharable objects that can be explored by the end-user. However, as we shall see, the story isn’t quite that simple (and nor is getting the most out of the camera).
- 11 ‘Megaray’* sensor
- 8x 43-340mm equivalent, constant F2 lens (limited to 43-150mm range in Everyday mode)
- 8GB or 16GB internal memory (depending on model)
- 1.46″ (33mm) 49,000 dot touch-screen
- Instant power-on, instant focus in Everyday mode
*There is a different relationship between the number of capture sites and the number of output pixels than in conventional cameras, so quoting a megapixel figure isn’t relevant.